[wsfvrszggn] DJI RoboMaster EP STEAM 4WD Brushless AI FPV APP Control Obstacle Avoidance RC Robot Arm Compatible Micro:bit Arduino Raspberry COD

Get DJI RoboMaster EP STEAM 4WD Brushless AI FPV APP Control Obstacle Avoidance RC Robot Arm Compatible Micro:bit Arduino Raspberry COD

Description:

Brand: DJI

Item: Robomaster EP

Product: Smart RC Robot Arm

Battery: 11.1V 3S 2400Mah Rechargable Lipo Battery

App Download: Click Here

 

Specifiction:

Infrared Sensor

Detection Zone: 0.1-10m

Detection FOV: 20 Degree

Measuring Precision: 5%

 

Robot Arm

Movement: Horizontal 0.22m/ Vertical 0.15m

Bearing: Dual

Gripper Opening: 10cm(max)

 

Servo

Weight: 70g approx.

Size: 44.2*22.6*28.6mm

Transmittion Ratio: 512

Working Mode: Angle/Speed Mode

 

Sensor Interchange Module

Interface Type: IO/AD Input

Interface Quantity: 2

 

Power

Conmunication Interface: CAN BUS*5

Input: TX30  12V

Ouput: USB Type-5 5V/2A,  TX30 12V/5A,  Pin Expansion 5V/4A

 

Camera

FOV:120°

Max Still Photo Resolution: 2560×1440

Max Video Resolution: FHD: 1920×1080  30P / HD: 1280 × 720 30P

Max Video Bitrate: 16 Mbps

Photo Format: JPEG

Video Format: MP4

Sensor: CMOS 1/4″; Effective pixels: 5 MP

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

 

Narrow Infrared Units:

Effective Range [1]: 6 m (in indoor lighting conditions)

Effective Area: Varies from 10°to 40° 

Effective area decreases as distance from the target increases.

 

Wide Infrared Units:

Effective Range [1]: 3 m (in indoor lighting conditions)

Effective Width: 360° (in indoor lighting conditions)

 

Hit Detector:

Detection Requirements: For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.

Maximum Detection Frequency: 15 Hz

 

DJI Robomaster EP:

Weight: Approx.6kg

Dimensions:45.00 x 34.00 x 31.00 cm / 17.72 x 13.39 x 12.2 inches

Chassis Speed Range:

0-3.5 m/s (forward) 

0-2.5 m/s (backward) 

0-2.8 m/s (sideways)

Max Chassis Rotational Speed: 600°/s

 

M3508I Brushless Motor:

Max Rotational Speed: 1000 rpm

Max Torque: 0.25N*m

Max Output Power: 19 W

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Driver: FOC

Control Method: Closed-loop speed control

Protection: Overvoltage/Overtemperature/Soft-start/Short-circuit/Chip and sensor anomaly detection 

 

Control:

Controllable Launching Frequency: 1-8/s

Max Launching Frequency: 10/s

Initial Launching Speed: Approx. 26 m/s

Average Load: Approx. 430

 

Gimbal: 

Controllable Range: Pitch: -20° to +35°/ Yaw: ±250°

Mechanical Range: Pitch: -24° to +41° / Yaw: ±270°

Max Rotational Speed: 540°/s

Vibration Control (on the flat surface): ±0.02°

 

Intelligent Controller:

Latency (depending on environmental conditions and mobile device):

Connection via Wi-Fi: 80-100ms /Connection via Router: 100-120ms 

(unobstructed, free of interference)

Live View Quality: 720p/30fps

Max Live View Bitrate: 6 Mbps

Operating Frequency: 2.4 GHz, 5.1 GHz, 5.8 GHz

Operating Mode: Connection via Wi-Fi, Connection via Router

Max Transmission Distance (unobstructed, free of interference):

①Connection via Wi-Fi:

FCC, 2.4 GHz 140 m, 5.8 GHz 90 m

CE, 2.4 GHz 140 m, 5.8 GHz 70 m

SRRC, 2.4 GHz 130 m, 5.8 GHz 130 m

MIC, 2.4 GHz 140 m

 

②Connection via Router:

FCC, 2.4 GHz 180 m, 5.8 GHz 300 m

CE, 2.4 GHz 180 m, 5.1 GHz 100 m

SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m

MIC, 2.4 GHz 170 m, 5.1 GHz 180 m

 

Transmission Power (EIRP):

①2.400-2.4835 GHz 

FCC: ≤30 dBm 

SRRC: ≤20 dBm

MIC: ≤20 dBm

 

②5.170-5.25 GHz

FCC: ≤30 dBm 

SRRC: ≤23 dBm

MIC: ≤23 dBm

 

③5.725-5.850 GHz 

FCC: ≤30dBm 

SRRC: ≤30dBm

 

Transmission Standard: IEEE802.11a/b/g/n

 

Intelligent Battery:

Capacity: 2400 mAh

Nominal Charging Voltage: 10.8 V

Maximum Charging Voltage: 12.6 V

Battery Type: LiPo 3S

Energy: 25.92 Wh

Weight: 169 g

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Charging Temperature Range: 5 to 40 °C (41 to 104 °F)

Maximum Charging Power: 29 W

Battery Life in Use: 35 minutes (measured at a constant speed of 2 m/s on a flat surface)

Battery Life on Standby: Approx. 100 minutes

 

Charger:

Input: 100-240 V, 50-60Hz, 1A

Output Port: 12.6 V=0.8A or 12.6 V=2.2A

Voltage: 12.6 V

Rated Voltage: 28 W

 

App:

App: RoboMaster

iOS: 10.0.2 or later

Android: Android 5.0 or later

 

Router:

Recommended Routers:

TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China) 

TP-Link Archer C7; NETGEAR X6S (International)

 

Supported SD Cards:
capacity up to 64GB

Recommended outdoor power supply solution for routers: Laptop Power Bank (match the input power of the router)

DJI RoboMaster EP STEAM 4WD Brushless AI FPV APP Control Obstacle Avoidance RC Robot Arm Compatible Micro:bit Arduino Raspberry COD See detail